Screw anchor monitor & data logger
Utilising the same technology as the Torque Hub, the Torque Spool delivers over 99% accurate torque readings. Data is sent over a robust 2.4 GHz RF FHSS signal to the handheld display / datalogger. The Torque Spool measures not only torque, but also inclination. This torque monitoring and data logging device is mounted between the output shaft and drive tool. To suit MD, UD and XD anchor drives (110,000 Nm to 500,000 Nm).
NEW REPORTING CAPABILITIES
Reports are exportable directly from the display, either via email using a smartphone with its’ hotspot enabled, or through the onboard USB port connected to a flash drive.
Models available
Torque Spools are available for MD, UD and XD Anchor Drives (110,000 Nm to 500,000 Nm).
More than just torque
Digga's Torque Spool provides you with a 99%+ accurate torque measurement alignment indicator and data logging proven solution.
Simple installation
Mounts between the output shaft and drive tool.
Rugged in-cab display
Monitor, record, and transfer job details with ease with a WiFi capable 7” touch-enabled display and rugged IP67 ABS casing. Circuit boards are fully potted, sealed, gasketed, and cushioned to ensure maximum protection and long life.
Export data logging records
Record torque, pile depth, angle, date, and time with additional user-defined export field options available. Reports are exported as both bare data (.dat file – open in Excel), and as a PDF line chart.
| Specification | |
| Rated Output (R.O.) | 2 mV/V nominal |
| Nonlinearity | 0.1% of R.O. |
| Hysteresis | 0.1% of R.O. |
| Nonrepeatability | 0.05% of R.O. |
| Zero Balance | 0.1% of R.O. |
| Compensated Temp. Range | 16° to 71°C |
| Safe Temp. Range | -54° to 93°C |
| Temp. Effect on Output | 0.005% of Load/°C |
| Temp. Effect on Zero | 0.005% of R.O./°C |
| Terminal Resistance | 350 ohms nominal |
| Excitation Voltage | 5 VDC |
| Safe Overload | 150% of R.O. |
