2 Speed Earth Drills for skid steer loaders from 2 to 5t

Digga's 2 speed earth drills, also called auger drives, for standard flow machines are designed for a wide range of earth drilling applications. Offering a high speed/low torque setting for the smaller auger jobs when you need the extra RPM, and low speed/high torque for when you really need to grind out that larger diameter hole. It's like having 2 drive units in 1.

Backed up with industry leading warranty and a European factory, we provide solutions for skid steer loaders of various makes and models including Kubota, Bobcat, Cat, JCB, Toyota, New Holland, Case, Komatsu, JCB, Terex, ASV and more.

Our range of 2 speed earth drills suit skid steer loaders with flows between 20 and 75 lpm.

  • Improved motor design & performance with 2 Speed options:
    • Low speed - High torque for large holes
    • High speed - Low torque for smaller holes
  • Suitable for a wide range of ground conditions:
    • Soft loose soils, hard soils, and rocky conditions
  • Integrated ECV (Energy Control Valve)
  • Simple electrical connection:
    • 12 or 24 volt coil, just requiring connection
    • Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
  • Low maintenance with 5yr gear box and 3yr motor warranty
Rec Flow Range 20-75 20-75
Max Torque 2954 Nm 4664 Nm
Pressure Valve Optional Optional
Energy Control Valve N / A N / A
Max Pressure (Do Not Exceed) 200 Bar @ 76 lpm
Max Flow (Do Not Exceed) 76 lpm @ 200 bar
Max Power (Do Not Exceed) 25 Kw (24 hp)
Overall Length 766 mm 877 mm
Diameter 240 mm 240 mm
Weight (No Frame/Hitch) 75 kg 104 kg
Std Output Shaft 65 mm Round 75 mm Square
Swing Control Optional Optional
Diggalign Optional Optional
Rec Auger 4 Series 6 Series
Max Auger Dia Clay/Shele* 600 mm 900 mm
Max Auger Dia Earth* 750 mm 1000 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.