2 Speed High Powered Screw Pile Torque Heads 45000-94000nm
Digga's Supa Drive range of Screw Pile Torque Heads, also called Anchor Drives, produce between 45,000Nm and 94,000Nm. Digga manufacture the only dedicated Screw Pile Torque Heads specially designed for the rigors of helical pile installation. If you're looking for industry leading performance and reliability, with engineering back up, experienced service you can count on, look no further than Digga for all your Screw Pile Drive needs. Our reputation has been built over 31 years of product quality and customer service. We provide solutions for excavators of various makes and models including Kubota, Bobcat, Cat, JCB, Case Komatsu, Kobelco, Takeuchi, Volvo and Doosan Excavators.
WIDER RANGE OF APPLICATIONS
- Choose a 2 speed drive. It's like owning 2 drives in 1.
- Offers the best of both worlds: high speed when you need it for those tricky jobs and high torque allowing you to take on that slightly larger job with the same equipment
- Install both small and larger helical piles with just one drive unit
- Use your screw pile torque head with optimum RPM / Torque for various pile sizes
- Save time and maximize profits by installing smaller helical piers with more efficiency
- Begin with high speed / low torque
- Flick the switch to low speed, high torque to finish off
SIMPLE ELECTRICAL CONNECTION
- Simple 12 or 24 volt coil, just requires connection
- Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
THE FASTEST DRIVE HEAD IN ITS CLASS
Our 2 speed drives for excavators suit machines with flows up to 380 lpm, providing you the speed and performance without having to detune your machine.
COMPACT, HIGH QUALITY, DIGGA MADE GEARBOX
Precision machined in-house from high grade alloy steel, specially formulated for gear manufacturing. A highly efficient, pressurised gearbox to ensure no leaks & minimal maintenance.
STANDARD BUILT-IN PRV (PRESSURE RELIEF VALVE)
Ensures maximum volumetric efficiency for consistent & efficient application throughout the working day.
INTEGRATED PRV (ENERGY CONTROL VALVE)
This revolutionary bypass valve is fitted to the drive to control the rapid decompression of oil should it be used for screw anchor application.
ENGINEERED HOOD & EARS
For maximum strength. Specifically designed for heavy duty drilling applications.
EXTREME DUTY SHAFT LOCKING SYSTEM
The Digga 2 piece shaft, is a separate component to the planetary carrier, isolating the planetary gears from the pushing, pulling, and bending forces generated by the machine.
|Max Torque||45629 Nm||53505 Nm||70007 Nm||8483 Nm||93882 Nm|
|Energy Control Valve||Fitted||Fitted||Fitted||Fitted||Fitted|
|Max Speed (Low Torque)||78 rpm||66 rpm||51 rpm||42 rpm||38 rpm|
|Max Speed (High Torque)||46 rpm||39 rpm||30 rpm||25 rpm||22 rpm|
|Max Pressure (Do Not Exceed)||345 Bar @ 266 lpm|
|Max Flow (Do Not Exceed)||380 lpm @ 240 bar|
|Max Power (Do Not Exceed)||150 Kw (200 hp)|
|Overall Length||1493 mm||1493 mm||1493 mm||1493 mm||1493 mm|
|Diameter||600 mm||600 mm||600 mm||600 mm||600 mm|
|Weight (No Frame/Hitch)||838 kg||836 kg||836 kg||836 kg||843 kg|
|Std Output Shaft||100 mm