Digga Europe      Digga France      Digga North America      Digga Australia

Digga's PD4 to PD10 range of Earth Drills are ideally suited for Backhoes and Excavators with a flow between 55 to 115 lpm. We distribute our Earth Drills all over Europe including England, Germany, France, Russia, Poland, Italy and Spain to name a few.

The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are fitted with Digga / Eaton bell motors specially designed for drilling and augering in most ground conditions.

Features 
  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with Eaton/Digga geroler hydraulic motor
  • No case drain required
  • Full range of shafts available upon request
  • Extreme duty shaft locking system
  • Drive fits down the hole for greater digging depth
  • Low maintenance with 5yr gear box and 3yr motor warranty
  PD4 PD5 PD6
Rec Flow Range 55-85 lpm 60-95 lpm 70-115 lpm
Max Torque 4448 Nm 5151 Nm 5596 Nm
Pressure Valve Fitted Optional Optional Optional
Max Pressure
Do Not Exceed
240 bar @ 60 lpm
Max Flow
Do Not Exceed
115 lpm @ 130 bar
Max Power
Do Not Exceed
25 Kw (34 hp)
Overall Length 579 mm 579 mm 730 mm
Diameter 240 mm 240 mm 240 mm
Weight
No Frame / Hitch
56 kg 62 kg 84 kg
Std Output Shaft 75 mm square 75 mm square 75 mm square
Swing Control Optional Optional Optional
Diggalign Optional Optional Optional
Rec Auger A4 / RC4 A6 / RC6 A6 / RC6
Max Auger Dia Clay/Shale* 750 mm 900 mm 900 mm
Max Auger Dia Earth* 900 mm 1000 mm 1000 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
  PD7 PD8 PD10
Rec Flow Range 75-115 lpm 80-115 lpm 85-115 lpm
Max Torque 6040 Nm 7024 Nm 8487 Nm
Pressure Valve Fitted Optional Optional Optional
Max Pressure
Do Not Exceed
240 bar @ 60 lpm
Max Flow
Do Not Exceed
115 lpm @ 130 bar
Max Power
Do Not Exceed
25 Kw (34 hp)
Overall Length 734 MM 854 MM 854 MM
Diameter 240 MM 290 MM 290 MM
Weight
No Frame / Hitch
100 KG 107 KG 110 KG
Std Output Shaft 75 mm square 75 mm square 75 mm square
Swing Control Optional Optional Optional
Diggalign Optional Optional Optional
Rec Auger A6 / RC6 A6 / RC6 A6 / RC6
Max Auger Dia Clay/Shale* 900 mm 1000 mm 1000 mm
Max Auger Dia Earth* 1000 mm 1200 mm 1500 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Digga Europe - PD10 Auger Drive Unit