Digga Europe      Digga France      Digga North America      Digga Australia

Digga's PDX2 to PD6 range of Earth Drills are ideally suited for mini excavators 2 tonnes to 5 tonnes with a flow between 30 to 115 lpm.Our factory is based in Hanover England and we distribute throughout Europe.

The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are fitted with Digga / Eaton bell motors specially designed for drilling and augering in most ground conditions.

Features 
  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with Eaton/Digga geroler hydraulic motor
  • No case drain required
  • Full range of shafts available upon request
  • Extreme duty shaft locking system
  • Drive fits down the hole for greater digging depth
  • Low maintenance with 5yr gear box and 3yr motor warranty
  PDX2 PDX3 PD3
Rec Flow Range 30-50 lpm 30-55 lpm 45-75 lpm
Max Torque 2307 Nm 2831 Nm 3544 Nm
Pressure Valve Fitted Optional Optional Optional
Max Pressure
Do Not Exceed
240 bar @ 60 lpm
Max Flow
Do Not Exceed
115 lpm @ 130 bar
Max Power
Do Not Exceed
25 Kw (34 hp)
Overall Length 557 mm 579 mm 579 mm
Diameter 187 mm 187 mm 240 mm
Weight
No Frame / Hitch
45 Kg 45 Kg 56 kg
Std Output Shaft 65 mm Round 65 mm Round 65 mm Round
Swing Control n / a n / a Optional
Diggalign n / a n / a Optional
Rec Auger A4 / RC4 A4 / RC4 A4 / RC4
Max Auger Dia Clay/Shale* 450 mm 450 mm 600 mm
Max Auger Dia Earth* 600 mm 600 mm 750 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
  PD4 PD5 PD6
Rec Flow Range 55-85 lpm 60-95 lpm 70-115 lpm
Max Torque 4448 Nm 5151 Nm 5596 Nm
Pressure Valve Fitted Optional Optional Optional
Max Pressure
Do Not Exceed
240 bar @ 60 lpm
Max Flow
Do Not Exceed
115 lpm @ 130 bar
Max Power
Do Not Exceed
25 Kw (34 hp)
Overall Length 579 mm 579 mm 730 mm
Diameter 240 mm 240 mm 240 mm
Weight
No Frame / Hitch
56 kg 62 kg 84 kg
Std Output Shaft 75 mm square 75 mm square 75 mm square
Swing Control Optional Optional Optional
Diggalign Optional Optional Optional
Rec Auger A4 / RC4 A6 / RC6 A6 / RC6
Max Auger Dia Clay/Shale* 750 mm 900 mm 900 mm
Max Auger Dia Earth* 900 mm 1000 mm 1000 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Digga Europe - PD6 Auger Drive Unit