Digga Europe      Digga France      Digga North America      Digga Australia

Digga's PD12 to PD25 range of auger drives are ideally suited for 10 to 20t excavators with a flow between 70 to 230 lpm. Our Earth Drills are distributed all around Europe.

Fitted with Digga / Eaton bell motors with intergrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drilling drives are specially designed for drilling and augering in most ground conditions.

Features 
  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with Eaton/Digga geroler hydraulic motor
  • No case drain required
  • Full range of shafts available upon request
  • Extreme duty shaft locking system
  • Drive fits down the hole for greater digging depth
  • Low maintenance with 5yr gear box and 3yr motor warranty
  PD12 PD15 PD18
Rec Flow Range 120-230 lpm 120-230 lpm 120-230 lpm
Max Torque 11268 Nm 13897 Nm 17603 Nm
Pressure Valve Fitted Included Included Included
Max Pressure
Do Not Exceed
240 bar @ 130 lpm
Max Flow
Do Not Exceed
230 lpm @ 130 bar 210 lpm @ 145 bar 230 lpm @ 130 bar
Max Power
Do Not Exceed
50 Kw (67 hp)
Overall Length 950 mm 1006 mm 1006 mm
Diameter 290 mm 290 mm 290 mm
Weight
No Frame / Hitch
149 Kg 176 Kg 176 Kg
Std Output Shaft 75 mm square 75 mm square 75 mm square
Swing Control Optional Optional Optional
Diggalign Optional Optional Optional
Rec Auger A8 / RC8 A8 / RC8 A8 / RC8
Max Auger Dia Clay/Shale* 1200 mm 1200 mm 1500 mm
Max Auger Dia Earth* 1600 mm 1600 mm 1600 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
  PD22 PD25
Rec Flow Range 120-230 lpm 120-230 lpm
Max Torque 22142 Nm 26267 Nm
Pressure Valve Fitted Included Included
Max Pressure
Do Not Exceed
240 bar @ 130 lpm
Max Flow
Do Not Exceed
230 lpm @ 130 bar
Max Power
Do Not Exceed
50 Kw (67 hp)
Overall Length 1006 mm 1152 mm
Diameter 290 mm 355 mm
Weight
No Frame / Hitch
176 Kg 300 Kg
Std Output Shaft 75 mm square 100 mm square
Swing Control Optional Optional
Diggalign Optional Optional
Rec Auger A8 / RC8 RC10 / RC11
Max Auger Dia Clay/Shale* 1500 mm 1500 mm
Max Auger Dia Earth* 1600 mm 1800 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.
Digga Europe - PD25 Auger Drive Unit